Honda Maintenance Schedule

Following your Honda maintenance schedule is exceptionally easy. This is because Honda models from the past few generations feature the Maintenance Minder system. This system will alert you when your Honda is due for maintenance by flashing Honda service codes on your display. Take a moment to learn about the Honda service intervals, as well as how to read Honda maintenance codes. Then, explore our Honda service specials near Middleburg Heights and contact Honda of Middleburg Heights to arrange for a tune-up!

Honda Service Intervals

Your Honda maintenance schedule may vary, depending upon which model you drive. Thus, it’s imperative to always check your owner’s manual for specifics to your Parma vehicle, or go by the Honda maintenance codes on your display. That said, take a moment to review the service schedule for the Honda CR-V crossover to get a general sense of what the maintenance schedule is like:

Honda CR-V Maintenance Schedule

7,500/22,500/37,500/52,500/67,500/82,500 miles:

• Check and replace fluids
• Have an oil and filter change
• Inspect tire treads
• Check tire pressure
• Rotate tires
• Perform a brake inspection
• Lubricate throttle linkage.

15,000/45,000/75,000/105,000 miles:

• Lubrication of chassis and all hinges
• Replace the oil drain plug
• Replace oil gasket
• Replace windshield wipers
• Replace spark plugs as needed
• Rotate and balance wheels
• Inspect undercarriage
• Inspect shocks and struts
• Inspect and adjust the clutch pedal
• Check a/c and heater operation
• Replace the air conditioning filter
• Service transmission
• Inspect park brake
• Re-torque drive shaft
• Check interior lamps and exterior lamps
• Check steering systems
• Inspect steering gearbox
• Check steering wheel
• Check fuel systems
• Check differential oil
• Check brake linings and hoses

30,000/60,000/90,000/120,000 miles: 

• All services above
• PCV valve
• Inspecting fuel tank cap gasket
• Checking fuel lines and connections
• Service transmission
• Service battery
• Clean cables
• Replace differential oil
• Inspect transfer case oil
• Inspect air elements
• Inspect all exterior and interior lamps
• Lubricate propeller shaft
• Lubricate wheel bearings
• Propeller shaft flex coupling inspection
• Check the battery and clean the terminals
• Road test and quality control

Honda Maintenance Codes

As we mentioned earlier, your display will flash Honda service codes when your Maintenance Minder system detects that your vehicle is due for a tune-up. The Honda maintenance codes combine either the letter “A” or “B,” with a series of numbers. To read the codes, consult our skeleton key below:

Primary Honda Service Codes

• Service A: Denotes recommended oil and filter change
• Service B: Indicates it’s time for an oil and filter change, a brake cleaning and lubrication, a parking brake adjustment, and an in-depth inspection of the brake parts.

Secondary Honda Service Codes

• 0 – Inspection
• 1 – Tire rotation
• 2 – Cabin and engine air filter changes
• 3 – Transmission fluid replacement
• 4 – Spark plugs replacement, timing belt change, and valve adjustment
• 5 – Engine coolant replacement
• 6 – Rear differential fluid replacement (if applicable)
• 7 – Brake fluid replacement

Reach Out for Affordable Honda Service Near Berea

Now that you’ve read about the Honda maintenance schedule and Honda service codes, if you have further questions, simply call Honda of Middleburg Heights at (216) 946-9792. We clarify any lingering concerts and can book you for an appointment at our garage for an affordable tune-up. While you’re here, explore our service tips for other helpful reads!